CLS-200 Galvanometer
Item No.: CLS-200
Closed Loop Scanner/Driver
Features:
The most affordable closed loop scanner
Precision laser scanning or beam positioning at minimum cost
Low power requirement and maintenance
Rugged design and reliable performance
Specifications:
Repeatability: > 1%
Rotational Linearity: Approx. 1%
Range of Scan (optional): +/- 25 degree
Max Speed: 200Hz
Delay time from voltage stop to torque change: 180u sec.
Torque: 15gcm
Coil Resistance: 20ohm
Coil Inductance: 7mH at 1V/1KHz
Operating Voltage Range: -/+ 15 to -/+ 24 VDC
Operating Current Range:
Peak Performance: 1 A
Normal Operation: 200 mA
Standby: 100mA
Input Signal's Amplitude Range: -10 to +10 VDC
Offset Potentiameter sets the zero point
Input Impedance: 10K ohm
Dimensions:
Scanner: 3 x 2 x 3 inches
Beam height: 2.125 inches
Driver: 4 x 3.5 x 1.25 inches
Driver's Input Signals: 1&2 - Reference, 3 - X, 4 - Y, 5 - Z.
Each PCB driver can drive up to three scanners for X-Y-Z- configuration.
For X-Y applications, one driver is left blank.
Price: $500 for a complete X-Y Scanner/ Mirror/Driver/Cable/Mount.
Quantity discount prices are available.
Driver Power Supply (two needed to provide dual polarity): $59.00/ea.
size: 100.0(L) x 100.0(W) x 36.0(H) mm
Input: 110 - 240VAC/0.6A
Output: 15VDC, 1.7A
Prices are FOB Minden, USA and subject to change without notice.
The specifications are subject to change without notice.