6210H Scanner Specifications:
Extremely high mirror speed positioning
Wide Scanning angle of 80 ° optical
Precision mounting eliminates optical re-alignment
Low wobble and jitter
Minimal power required
Highest peak accelerations
Rugged and reliable design
Optical Apertures Supported, Two Axis: 3 mm.
Recommended Inertial Load: 0.2 GM*CM ².
Rotor Inertia: 0.02GM*CM ² ±10%
Torque Constant: 2.5E+4 Dyne-cm/Amp ±10%
Coil Resistance: 4.1 ±10% ohm
Max. RMS/Peak Current: 1.6A.
Small Angle Step Response: 0.175 mS, with balance inertia matched load
Linearity: 99.5%, Min, over 40 Deg.
Repeatability: 15 Microradians, Max.
Length: 35.7mm (without mirror)
CTI 6210H scanner: $489.99/ea.
(Mirror/Mirror Mount are included)
CTI 67821H 6210H driver card: $389.99/ea.
Driver cable: $50.00/ea.
Scanner Mount: $125.00/ea.
Driver Power Supply (two needed to provide dual polarity): $79.99/ea.
size: 198.5(L) x 98.0(W) x 37.0(H) mm
Input: 110 - 120VAC/3.15A, 220 - 240VAC/1.5A
Output: 24VDC, 4.5A
MeshTel INTELITE, INC. USA Tel: 775 267 5959, Fax: 775 267 5958
Prices are FOB Minden, USA and subject to change without notice.
Disclaimer: The specifications are subject to change without notice.